Honda Motorcycles - FireBlades.org banner

1 - 3 of 3 Posts

·
Registered
Joined
·
135 Posts
Discussion Starter #1
i put my blade together today after doing the shims and i got the inlet cam 1 tooth out now im worried ive done damage will this be ok or am i now going to strip the head off :-(it turned over ok with no contact to the valves it was only turned by had,But its so difficult to see the marks behind the frame even with a mirror,
 

·
Premium Member
Joined
·
32,034 Posts
i put my blade together today after doing the shims and i got the inlet cam 1 tooth out now im worried ive done damage will this be ok or am i now going to strip the head off :-(it turned over ok with no contact to the valves it was only turned by had,But its so difficult to see the marks behind the frame even with a mirror,

Put the plugs in and see if she has compression, but I'd expect the valves to be fine with just one-tooth out.
 

·
Registered
Joined
·
135 Posts
Discussion Starter #3
thanks for putting my mind at rest i had visions of missing the isle of man TT this year if i have anymore bad luck,
 
1 - 3 of 3 Posts
Top